Vertical Balers : XL-42 / XL-62

 

Product Sheet

XL-Series Product Sheet (pdf)

Product Certifications

Rotobale's XL-42 Baler received Pre-Start Health and Safety Review Exemption (PSR) and Approved for Use/Production certification.

"This document serves as an exemption under Section 7 of Ministry of Labour Regulation 851 meeting part of the conditions set out in subsection 6."

Documentation

View our Operational Documentation

Introduction

Rotobale's Vertical Balers have been re-designed with the end user in mind. A low feed height combined with a larger feed opening, front of the unit bale tie-off system and automatic bale ejection make Rotobale's Vertical Balers safe and efficient to operate.

Our Vertical Balers have been structurally designed to accommodate a number of recyclable materials including cardboard, paper, plastics, aluminum and rags. Engineered for reliability and durability the XL-42 baler assures high performance, low maintenance and is capable of producing corrugated bales up to 1000 pounds each.

Rotobale's Vertical Balers provide a profitable, space saving solution and offer a waste recycling advantage to our customers.

Features
  • Low feed height and large feed opening for easier loading
  • Bale tie guide design eliminates the need for rear access
  • Cross cylinder design minimizes overall space requirement - ideal for tight spaces
  • Low maintenance and easy to use hydraulic ejection system
  • Bale weights up to 1,200 lbs on XL-42 and up to 1,700 lbs on XL-62 model
  • Heavy duty construction

Safety Features

Rotobale's Vertical Baler has been newly redesigned to incorporate enhanced safety features. The totally enclosed rear design and available level 3 interlock with safety monitoring relay make it one of the safest balers in it's class.

Newly designed bale tie guides at rear of baler eliminate the need for operator to access the rear of the baler. The bale tie process can now completed from the front of the baler resulting in less clearance required at the rear of the baler.

  • NEW Employee safe “totally enclosed” design
  • Gradual release bale chamber door latch mechanism
  • Tamper proof safety switches
  • User friendly control panel comes standard with key start, full light, and emergency stop button
  • Easy access for preventative maintenance
  • Manufacturers Safety Declaration with optional Level 3 Safety Interlock Switch

Specifications

Model

XL-42

XL-62

Feed Opening Height (A)

21"

30"

Load Height (B)

38"

53"

Overall Width (C)

78"

78"

Overall Depth (D)

67"

67"

Overall Depth Door Open (E)

122"

122"

Frame Height (F)

82"

108"

Overall Height Installed (G)

108"

155"

Normal Bale Size (WxDxH)

60"x42"x30"

60"x42"x44"

Bale Weight Up To

1,200 lbs

1,700 lbs

Bale Ties

6

6

Baling Force

80,000 lbs

80,000 lbs

Electrical Motor

10/5 HP

10/5 HP

Pump Capacity

10.8/5.4 gpm

10.8/5.4 gpm

Cycle Time

40s/80s

55s/110s

Voltage

To suit customer needs

Electrical Control Voltage

110 VAC

110 VAC

Normal Pressure

2000 psi

2000 psi

Hydraulic Cylinder

(2) 5"

(4) 4"

Specifications are subject to change without notice to accomodate equipment improvements.

Front View

Side View

Top View

Photos

Re-designed baler rear is now totally enclosed to maximize operator safety.

 

Newly designed bale tie guides at rear of baler eliminate the need for operator to access the rear of the baler. The bale tie process can now completed from the front of the baler resulting in less clearance required at the rear of the baler.

Easy-to-use automatic bale ejection